Description of 1.2m Bottle Blow Dryer:
This machine is mainly an automatic drying device for drying the moisture on the outer wall of the bottle after filling, and then pasting the self-adhesive trademark.
Main feature:
1. This series of blow dryers are mainly used to blow dry the bottles before sticking the self-adhesive trademarks.
2. Using advanced aerodynamic principles, stable performance, low temperature operation, high visibility and low noise.
3. Closed working room, the operating temperature can reach 60℃, which improves the drying effect and is suitable for medium and high speed production lines.
4. The air knife can be adjusted in all directions up, down, left, and right, and the drying area can be adjusted as needed, and the operation is simple.
5. The machine is suitable for a wide range of bottle types, and the dust pollution caused by brushless brushes can easily remove water from ceramics and glass bottles to ensure the quality of labeling.
6. The machine overcomes the situation that the original dryer brush is seriously worn, frequently replaced, and the bottle is easily poured, and there is no dust pollution caused by the brush.
7. The machine has the advantages of automatic silencer, air purification, energy saving and environmental protection.
8. The spider air nozzle type air knife is specially designed for drying the water on the surface of various round bottles and shaped bottles. It uses a custom-made universal joint nozzle to adjust the angle according to the shape of the bottle, and blow dry several times from top to bottom to ensure that the entire bottle is dried 360 degrees without dead corners and no moisture residue, so as to achieve the maximum drying effect and power saving effect.
